Material Safety Data Sheet
IDENTIFICATION
Product Name: eBioscience Foxp3 Fixation/Permeabilization Buffer
Catalog No: 00-5521
Description:
1. eBioscience Fix/Perm Concentrate (cat. 00-5123, 30 mls)
2. eBioscience Fix/Perm Diluent (cat. 00-5223, 100 mls).
Aqueous solution containing formaldehyde and detergent. Formaldehyde CAS No: 30525-89-4.
Preparation Date: September 28, 2005
HAZARDOUS COMPONENTS
This product is an irritant and potential carcinogen.
HAZARDS INFORMATION
The toxicological properties of products have not been fully investigated. This product is harmful and potentially cancerous in contact with skin or ingested. Avoid inhalation of vapors. Always follow Good Laboratory and Industrial Hygiene Practices and wear proper personal protective equipment when handling chemicals.
CHEMICAL PROPERTIES
Boiling Point: Unknown
Melting Point: Unknown
Specific Gravity: Unknown
Vapor Pressure: Unknown
Vapor Density: Unknown
Evaporation Rate: Unknown
Solubility in Water: Soluble
Appearance and Odor: Clear liquid with aldehyde odor
FIRE FIGHTING PROCEDURES
Flashpoint: N/A
Flammable Limits:
Extinguishing Media: Use media appropriate for site conditions.
Unusual Fire & Explosion Hazards: None known. Wear self-contained breathing apparatus and protective garments appropriate for site conditions.
REACTIVITY DATA
Stability/Incompatibility: Stable. See enclosed data sheet for product-specific storage information.
Hazardous Decomposition: Dangerous decomposition products released as gas/vapor.
FIRST AID MEASURES
Eye Contact: Irritant. Check for contact lenses and remove if present. Flush eyes with large volumes of water for at least 15 minutes. Seek medical attention if eyes remain red and/or irritated.
Skin Contact: Wash contact areas thoroughly with soap and water after handling. Seek medical attention if area remains irritated. Immediately remove contaminated clothing; contaminated clothing should not be worn until after it has been properly cleaned.
Ingestion: Seek medical attention or call poison control center immediately.
Inhalation: Remove from further exposure. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek medical attention immediately.
ACCIDENTAL RELEASE MEASURES
Spill or Leakage Procedure: Dispose of absorbent material used to clean spills in accordance with local, state and federal regulations.
EXPOSURE CONTROL INFORMATION
Ventilation Data: Provide adequate local exhaust ventilation.
Respiratory Protection: None required if ventilation is adequate.
Protective Gloves: Wear chemical resistant gloves.
Other Protective Equipment: Eye protection, lab coat, apron or other protective clothing to minimize contact. Eyewash stations and deluge showers should be available.
Work Practices: Observe appropriate laboratory hygiene practices. Avoid contact with skin or eyes. Wash any exposed body area thoroughly with soap and water after completion of activities involving product.
Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control; all risks of use of the product are therefore assumed by the user.
